OPTOTRONIC FIT D CS L (Dip Switch) EL
Vlastnosti produktu
- Kmitočet: 0 Hz | 50 Hz | 60 Hz
- Napájecí napětí: 220…240 V
- Síťové napětí: 198 – 264 V
- Wide output current range
- Životnost: až 100.000 h (teplota Tc = 65 °C, četnost poruch max. 10 %)
Výhody produktu
- Flexible current setting (DIPswitch – 6 currents)
- Vysoká kvalita světla díky nízkému pulznímu proudu
- User flexibility with six different output currents from one driver
- Bezpečnostní požadavek s ohledem na ochranu proti přetížení, přehřátí, zkratu
- Dlouhá spolehlivá životnost při maximálních přípustných teplotách
- Enable slim fixture design with flat 21 mm height metal housing
Produkty
| Název výrobku |
|
|
|
|
|
Formulář údajů výrobku | ||
|---|---|---|---|---|---|---|---|---|
|
OT FIT 18/220…240/350 D CS L
|
32...54 V | 100 / 150 / 200 / 250 / 300 / 350 mA | 2100 mm | 300 mm | 210 mm | ||
|
OT FIT 40/220…240/350 D CS L
|
40…120 V | 100 / 150 / 200 / 250 / 300 / 350 mA | 2100 mm | 300 mm | 210 mm | ||
|
|
OT FIT 60/220…240/350 D CS L
|
90…175 V | 100 / 150 / 200 / 250 / 300 / 350 mA | 210,0 mm | 30,0 mm | 21,0 mm | ||
|
OT FIT 75/220...240/550 D CS L
|
90…216 / 90…188 / 90…167 / 90…150 / 90…136 V | 300 / 350 / 400 / 450 / 500 / 550 mA | 2100 mm | 300 mm | 210 mm |
Více o skupině výrobků
Druh použití
- Vhodné pro svítidla třídy ochrany I
- Instalace do systémů nouzového osvětlení v souladu s IEC 61347-2-13, přílohou J
- Vhodné pro instalaci do systémů nouzového osvětlení v souladu s EN 60598-2-22
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.