ICUTRONIC Intelligent DALI (SELV)
Vlastnosti produktu
- Kmitočet: 0 Hz | 50 Hz | 60 Hz
- Versatile scope of application due to output power range of up to 71.4 W
- Napájecí napětí: 220 240 V
- Dostupné se škálou proudového výstupu: až 1 400 mA
Výhody produktu
- Versatile SELV DALI driver up to 75 W due to flexible output characteristic
- Flexible current setting (RSet)
- High-quality dimming of 10 100 % by amplitude dimming
- No TouchDIM nor Corridor Function
- High quality of light thanks to <3% output ripple current
- Low standby consumption ≤ 0.5 W
Produkty
Název výrobku |
|
|
|
|
|
Formulář údajů výrobku | ||
---|---|---|---|---|---|---|---|---|
ETi DALI 25/220...240/500 LT2 L
|
20 51 V | 180...500 mA | 280,0 mm | 30,0 mm | 21,0 mm | |||
ETi DALI 35/220
240/700 LT2 L
|
20 51 V | 350 700 mA | 280,0 mm | 30,0 mm | 21,0 mm | |||
ETi DALI 75/220...240/1A4 LT2 L
|
20 51 V | 600 1400 mA | 280,0 mm | 30,0 mm | 21,0 mm |
Více o skupině výrobků
Druh použití
- Installation in emergency lighting systems according to IEC 61347-2-13, appendix J, except those used in high-risk task areas, i.e. those systems must not be used in workplaces where operators and other occupants of the premises are involved in potentially dangerous processes or situations.
- Vhodné pro svítidla třídy ochrany I
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.